.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

fkwash073-F3
£0.95 (£1.14 inc VAT)
OEM: 70-7351, E7351, 70-6961, E6961
Dowty Washers for Fuel Tap 1/4" Rubber inner section Hole id 1/2" Used for fuel petrol tap seal, also tacho drive seal, and other uses across the range of...
+

tap091-STD-F2
£10.95 (£13.14 inc VAT)
OEM: 83-2800, F12800, 03-3155
1/4" x 1/4" BSP Main Fuel Tap - Flat Lever Type with Filter and Locknut - Standard Quality These taps are generally used on many BSA, Norton and...
+

tap092-STD-F2
£10.95 (£13.14 inc VAT)
OEM: 83-2801, F12801, 03-1746
1/4" x 1/4" BSP Reserve Fuel Tap - Flat Lever Type with Filter and Locknut - Standard Quality These taps are generally used on many BSA, Norton and...
+

amal216
£2.45 (£2.94 inc VAT)
OEM: 376/093, 3/093, 99-0438
Nylon filter gauze for 600 and 900 Series Amal Concentric carburettors, and 376/389 Amal Monobloc carbs. OEM: 376/093, 3/093, 99-0438
+

fkamalmainjet
£4.45 (£5.34 inc VAT)
OEM: 376/100
Amal Monobloc and Concentric Main Jet All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow 100cc`s of fuel...

crush-wash351-F3
£1.45 (£1.74 inc VAT)
OEM: 70-7351, E7351
Crush Copper/Rubber Washers for Fuel Tap 1/4" Sealing washer for 1/4" petrol tap - Price for ONE washer. Rubber seal encased in copper, when fitted to fuel...
+

amalmk1-gk-std
£3.45 (£4.14 inc VAT)
OEM: 622/208, 622/073, 622/101, 13/163, 622/151, 622/082
Amal Concentric 600/900 Series Mark I Carburetter Gasket Set Gaskets and washers to open and clean or repair any Amal 600 or 900 series MK1 carburettor....
+

pipe011EP
£1.95 (£2.34 inc VAT)
Ethanol Proof Fuel / Oil Pipe - 1/4" Bore - Reinforced Black Nitrile Rubber SAE J30 R6 grade hosing for ethanol enriched E5 and E10 petrol. Suitable for...
+

fktappart106-F3
£0.95 (£1.14 inc VAT)
Fuel Tap Cork For Pull On Type Fuel Taps - 3/8" Normally you will require one cork per tap. Price is for ONE cork Note: These corks are bigger than you...
+

fkwash116-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/4" Gas Suit 1/4" Gas thread for fuel taps. Hole id 1/2" Supplied as 10 washers
+

tap14spig-F2
£9.95 (£11.94 inc VAT)
1/4" BSP - BAP Type Fuel Tap with Spigot Outlet and Filter - MAIN - ON/OFF/RESERVE This tap has a 1+1/2" tube allowing reserve fuel to remain in tank....
+

amal-622/197-406
£3.95 (£4.74 inc VAT)
OEM: 622/197, 6/197
Amal Float Needle - 376/389 Monobloc and 600/900 Concentric Genuine Amal float needle for Concentric and Monobloc carburettors. Viton tip for 6 and 9...
 

fkcap060H-F2
£1.25 (£1.50 inc VAT)
OEM: 82-4048, F4048
Fuel Tank Cap 2+1/2" Cork Washer Note: The tank caps as referred to as 2+1/2" caps, the washers are smaller at 2+3/8" OD, to enable fitting inside the...
+

fktappart022-F3
£1.75 (£2.10 inc VAT)
OEM: 82-8132S, 82-3182, 82-3337, F3182, F3337
Fuel pipe tap nut 1/4" gas thread Diameter across threads inside of nut = 7/16" Hole diameter = 3/8" 1/4 BSP thread, which is approx 1/2" thread diameter...
+

fkclip013-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 1/2inch. Fuel Pipe Clip 1/2"
+

gask101
£0.99 (£1.19 inc VAT)
OEM: 622/101, 6/101, 99-0522, 06-1900, 70-9711, E9711
Amal Carburettor Flange O-Ring Fits the 600 and 900 Carbs, for the inlet flange. Also fits the 376 Monobloc OEM: 622/101, 6/101, 99-0522, 06-1900, 70-9711,...
+

fkpipe016
£0.90 (£1.08 inc VAT)
Fuel Pipe, Oil Pipe 5/16inch (8mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 9/16" (14.5mm) Price is per foot length.
+

fktappart051-F3
£9.95 (£11.94 inc VAT)
Fuel Tap Pipe 90 Degree Elbow with Gas Nut - 1/4" (6.35mm) Fuel tap nut and spigot for 90 degree connection Will fit any tap with 1/4" Gas Thread fitting...
+

fktappart027-F3
£1.95 (£2.34 inc VAT)
Fuel Tap Pipe Spigot for 1/4" Gas Thread Nut Suitable for 1/4" thread. Requires a nut to attach to the fuel tap - see related products
+

amal-4/137A
£2.05 (£2.46 inc VAT)
OEM: 4/137A
Genuine Amal Choke Blanking Plug - Monobloc and Concentric Carburettors - 4/137A Screws into the mixing chamber top when a choke is not used. Fits all...
+

tank0260-E9
£1.95 (£2.34 inc VAT)
OEM: 83-0260, 42-8012, 42-8017
Fuel Tank Centre Bolt Mounting Rubber - Triumph OIF + BSA A and B Group + A50 and A65 Models Correct fitment on Triumph and BSA models with a raised...
+

adap2968-30
£2.25 (£2.70 inc VAT)
OEM: 70-2968, E2968, 70-4918, E4918
Triumph - Amal Carburettor Manifold Insulating Spacer - 1+3/16" (30mm) Rigid phenolic carburettor insulating block suitable for Triumph and other...
+

fkpipe416
£0.90 (£1.08 inc VAT)
Fuel Pipe 1/4inch (6.5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 1/2" (13mm) Price is per foot length.
+

amal-RKC/613
£2.95 (£3.54 inc VAT)
OEM: RKC/613, 4/035, 9/035, 5/077, 9/077
Genuine Amal Cable Adjuster and Lock Nut - RKC/613 For 600, 900, 276, 376, 389 series Amal carburettors. Screws into the top cap to adjust the cable....
+

fkpipe013
£0.80 (£0.96 inc VAT)
1/4 inch (6.5mm) id, 2m thick, CLEAR. Fuel Line 1/4" (6.5mm) CLEAR Plain fuel line, sold per 12" (30cm) OD: 7/16" (11mm) 2mm thick, clear plain PVC Photos...
+

amal151
£1.25 (£1.50 inc VAT)
OEM: 622/151, 6/151, 15-0203, 99-1153
Amal Float Bowl Drain Plug Washer - 600/900 Carburettors OD: 25/32" (19.5mm) ID: 9/15" (13.9mm) OEM:  622/151, 6/151, 15-0203, 99-1153
+

pipe011C-BD
£1.95 (£2.34 inc VAT)
Braided Fuel / Oil Pipe - 1/4" Bore - Black Nitrile Rubber - Ethanol Proof Suitable for oil, leaded and unleaded fuels. Suitable for pressurized...
+

fkamal376
£3.95 (£4.74 inc VAT)
OEM: 376/078, 376/092, 14/175, 376/067, 116/162, 376/074, NA43
Amal 376 Carburettor Gasket Set Gaskets for overhaul of the 376 Monobloc Carb. OEM: 376/078, 376/092, 14/175, 376/067, 116/162, 376/074, NA43
+

tappart3335/3337-F3
£4.95 (£5.94 inc VAT)
OEM: 82-3335, F3335, 82-3337, F3337, 82-3182, F3182
Fuel Pipe Spigot - 90° Elbow Type With 1/4" BSP Gas Nut 90 degree fuel pipe elbow with chrome plated gas nut suitable for use with 1/4" BSP fuel taps - as...
+

fkclip015-F3
£0.75 (£0.90 inc VAT)
Fuel pipe clip 5/8inch. Fuel Pipe Clip 5/8"
+

gask199-std
£0.95 (£1.14 inc VAT)
OEM: 71-3573, NA43A, E4919, 70-4919
Triumph 30mm Carburettor To Manifold Flange Gasket - 650/750cc Models - Standard Will fit most of the Amal carb flanges, sometimes combined with an...
+

fktappart057-F3
£5.95 (£7.14 inc VAT)
Fuel Pipe T Piece for 1/4" Pipe Bore Suit 1/4" or 6mm. Standard T piece is chromed. We have a few Brass T piece available, please select if required.

amal220
£4.95 (£5.94 inc VAT)
OEM: 376/097M, 3/097
Single, push-on, 1/4'' inside diameter tubing, for 6 and 9 Series carburettors and 376/389 Monobloc carbs. (Metal). OEM: 376/097M, 3/097
+

pipe016EP
£2.45 (£2.94 inc VAT)
Ethanol Proof Fuel / Oil Pipe - 5/16" Bore - Reinforced Black Nitrile Rubber SAE J30 R6 grade hosing for ethanol enriched E5 and E10 petrol. Suitable for...
+

fkwash117-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 3/8" Gas Suit 3/8" Gas thread for fuel taps. Hole id 5/8" Supplied as 10 washers
+

t/rub174m-E9
£3.45 (£4.14 inc VAT)
OEM: 42-8010, 40-8039, 68-8169
BSA Fuel Tank Centre Grommet or Chaincase Inspection Cover - Shallow Type Fuel tank plug fitted to many BSA models with a steel central mounting fuel...
+

amal372
£1.45 (£1.74 inc VAT)
OEM: 622/067, 6/067
Amal Needle Clip for 600 and 900 Amal concentric carburettors. OEM: 622/067, 6/067
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

fkpipe018
£0.80 (£0.96 inc VAT)
1/4inch id, 2.7mm thick, REINFORCED. Fuel Line 1/4" (6.5mm) REINFORCED Plain fuel line, sold per 12" 2.7mm thick, reinforced nylon braid PVC OD: 7/16"...
+

fkpipe015
£1.10 (£1.32 inc VAT)
Fuel Pipe, Oil Pipe 3/8inch (10mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 5/8" (16mm) Price is per foot length.
+

rubb858M-E9
£1.95 (£2.34 inc VAT)
OEM: 82-9064, 40-8085
Fuel Tank Centre mounting rubber. Fits the classic Triumph T140, T120, and TR25W models. Also compatible with the BSA B50 and B25 models etc. OEM: 82-9064,...
+

fkfuel01-F3
£1.00 (£1.20 inc VAT)
Fuel Filter - Nylon Petrol filter, to fit inline, between the petrol tank and the carburettor. Cheap and simple fuel filter. Simply replace them once a year...
+

amalneedjet-conc
£7.15 (£8.58 inc VAT)
OEM: 622/122
Amal Carburetter Needle Jet For CONCENTRIC Carbs All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow...

tappart119-F3
£4.45 (£5.34 inc VAT)
Fuel Tap Adaptor 1/4 "- 3/8" Converts your tap thread from 1/4"(1/2"o.d.) to 3/8" (5/8"o.d).
+

fkwash115-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/8" Gas Suit 1/8" Gas thread for fuel taps. Hole id 3/8" Supplied as 10 washers
+

rubb442H-E9
£1.25 (£1.50 inc VAT)
OEM: 82-5229, 82-4108, 68-8334, 82-3815
Front tank rubber for 500/650 (1964-74) and Triples (1969 on). OEM: 82-5229, 82-4108, 68-8334, 82-3815
+

tap728-F3
£7.95 (£9.54 inc VAT)
OEM: 60-7266
1/4" x 1/4" BAP Type Fuel Tap with Filter - MAIN OEM: 60-7266 BAP type fuel tap as used on Triumph T140 and Norton Commando models, will also fit...
+

pipe021m-F3
£0.95 (£1.14 inc VAT)
1/2" OD Fuel Pipe / Oil Pipe Ferrule To fit 1/4'' (6.4mm) bore tubing with an outside diameter of 1/2'' (12.7mm) Ideally crimp on to the fuel or oil pipe...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.